A&D OP-05 Spécifications télécharger pdf (Page 72)

9-4 OP-05 SETPOINT UNIT

The OP-05 setpoint unit is a thumbwheel switch unit designed for setting the setpoints exclusive for Batch weighing and

Loss-in-weighting use. By connecting this option to the AD-4401, each setpoint can be set with the thumbwheel switch on

the panel or the BCD input. Since up to 10 of these optional units can be connected in series, the setpoints can be easily

switched through an external unit.

Note

• When the minimum division is set to 10 or more, ten times the value set on the OP-05 will be used.

• When using this option, set the setpoint read mode SPF-01 to “2.”

Setting

SPF- Name Default

Parameter Description

0 Thumbwheel switch Unrequired mode

1 5-digit mode

Setpoint

value read

mode

2 16-digit mode

GENERAL SPECIFICATION

General Specification

Power supply 11.5 to 25 V DC (Unrequired when external setting input or serial connection is not used)

Power consumption 3.5 W at maximum

Working temperature

-5 °C to 40 °C

Weight Approx. 1 kg

Outer dimensions 192(W) x 118.6(D) x 57(H) mm (See the appearance drawing)

Setpoint parameter

Final (5 digits) / Free fall (3 digits) / Preliminary ( 4 digits)/ Overlimit (2 digits)/ Underlimit (2 digits)

INT/EXT, switching by the slide switch on the front panel

Setpoint Values Which Can

Be Set Externally

Final (5 digits. No input of 8 x 104) / Free fall (3 digits) / Preliminary (4 digits)

FRONT AND REAR PANEL

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 89 90

Pas de commentaire

A&D OP-05 Spécifications Page 72