A&D GH Series Manuel d'instructions télécharger pdf (Page 37)

8.3. Explanation of item “Environment, Display”

English

GB 37

Condition (Cond)

This parameter is for sensitive response to the fluctuation of a weight value.

Use for target weighing of powder, weighing of a very light sample or weighing

requiring a quick response.

This parameter is for stable weighing with slow response. Use to prevent a

weight value from drifting depending on the balance location.

Cond 0

Cond 2

Stability band width (St-b)

This parameter is for sensitive response of the stability indicator. Use for exact

weighing.

This parameter ignores slight fluctuation of a weight value. Use to prevent the

weight value from drifting.

St-b 0

St-b 2

This item controls the width of a weight value as a stable value. When the fluctuation per

second is less than this parameter, the balance displays the stability indicator and outputs

or stores the data. This parameter influences the “Auto-print mode”.

Zero tracking (trc)

The tracking function is not being used. Use for weighing of a very light sample.

The tracking function is used.

trc 0

trc 1

This function traces zero point drift and keeps a zero display automatically, when the weigh-

ing value drifts due to changes in the environment.

Display update rate (Spd)

The display update rate influences “Baud rate”, “Data pause” and “Stream mode”.

Decimal point (Pnt)

The decimal point form can be selected.

Automatic start (P-on)

When the AC adapter is connected, weighing is automatically started without key operation.

Use for a built-in balance in a system. Warm-up for at least one hour is necessary for accu-

rate weighing.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 70 71

Pas de commentaire

A&D GH Series Manuel d'instructions Page 37