A&D OP-05 Manuel d'instructions télécharger pdf (Page 37)

AD-4406 Weighing Indicator Page 35

10. Code Memory

The AD-4406 has four Code memories (1 through 4). Each Code memory stores a

set of setpoints.

The data is stored in non-volatile memory, and is not lost even if power is turned off.

Memory number 0 is a temporary memory and the data is lost when power is

turned off.

The active code memory number can be changed by key switch, external control

input, or a command via the serial interface.

Changing the Code Memory Number by External Input

The code memory number can be changed by external input from OP-05 or

OP-08.

Set F14 and F15 to 18.

F13=18 : Inhibit reading EXT.2 and EXT.3

to prevent unintentional reading when

switching the codes.

EXT2 EXT3 Memory Number

ON ON 1

OFF ON 2

ON OFF 3

OFF OFF 4

10. Code Memory

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 60 61

Pas de commentaire

A&D OP-05 Manuel d'instructions Page 37