A&D OP-05 Manuel d'instructions télécharger pdf (Page 31)

AD-4406 Weighing Indicator Page 29

6.3. CF-Functions

Item

Parameter

Description

* 0 No limitation

CF00

Zero tracking width,

motion detection

condition

1 Use limitation at F01, F02, F03, F27 and F28

* 0 2% of CAP, Tare limit is 100 % CAP

1 10% of CAP, Tare limit is 100 % CAP

2 3% of CAP, Tare limit is 50 % CAP

CF01

Push zero range

3 4% of CAP, Tare limit is 50 % CAP

0 Not to zero when turning the display on.

*1 10% of CAP

2 3% of CAP

CF02

Power on zero range

Turning the display on,

the range to zero display.

3 4% of CAP

0 Gross when displaying gross

1 Gross

CF03

Zero tracking

* 2 Gross or Net when displaying net

TARE, ZERO in motion / TARE at negative gross

* 0 Not to execute / Not to execute

1 Execute / Not to execute

2 Not to execute / Execute

CF04

TARE, ZERO in motion /

TARE at negative gross

value

3 Execute / Execute

* 0

Not to output data at unstable value or overload

Effective in key mode

CF05

Output on overload and

unstable state.

1 To output data always

GROSS / NET / TARE

* 0 GS / NT / TR

1 GS / NT / TR

CF06

Header 2

2 G_ / N_ / T_ (_:Space 20h)

* 0 Two digits CF07

Number of unit digits

1 Three digits

* 0 Not used (Ineffective) CF08

Accumulation function

1 Used (Effective)

CAP : maximum capacity *: Initial settings

Power on ZERO (CF02)

CF02=0 After power on, the weight display starts immediately.

CF02=1,2,3 When the zero range is exceeded at power on, ------ is displayed.

Press the ESC key to start the weight display.

6.3. CF-Functions

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 60 61

Commentaires sur ces manuels

Pas de commentaire

A&D OP-05 Manuel d'instructions Page 31

Commentaires sur ces manuels

Produits connexes et manuels pour Mesure, test et contrôle A&D OP-05