A&D OP-05 Manuel d'instructions télécharger pdf (Page 18)

Page 16 AD-4406 Weighing Indicator

Press and hold the ON/OFF key and press the ESC key.

No parameters are changed,

CAnCEL is displayed and the calibration mode is finished.

Step18 Press the ON/OFF key to turn the display off.

5.3. Weighing Range Function

The weighing range function can select "single range" or "dual range". Specify each

weighing interval (division) for the multi-interval instrument. Each weighing interval is

displayed according to a net value or gross value.

Note When single range is used, performing this function is not required.

Example 1 The gross display.

Specified parameters:

First range Range = 50.00 kg, division 0.02 kg

Second range Range = 100.00 kg (maximum capacity), division 0.1 kg

Display

0 kg to 50 kg : The first range, division 0.02 kg.

50 kg to 100 kg : The second range, division 0.1 kg.

division 0.02 kg

division 0.1 kg

0 kg 50 kg 100 kg Gross

Weighing value

Example 2 The net display using a 40kg tare value.

Specified parameters: The same parameters as example 1.

Display

-40 kg to 50 kg : The first range, division 0.02 kg.

50 kg to 60 kg : The second range, division 0.1 kg.

division 0.02 kg

division 0.1 kg

-40 kg 0 kg 50 kg 60 kg Net

Tare value 90 kg 100 kg

40 kg Weighing value

5.3. Weighing Range Function

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 60 61

Pas de commentaire

A&D OP-05 Manuel d'instructions Page 18