A&D AD-4430B Spécifications télécharger pdf (Page 16)

- 14 - AD-4430B

Clearing The Tare Weight And Zero Adjustment

The way to clear the tare weight and zero adjustment : While pressing and holding the

(TARE) key, turn on the module. Another way : In turning off the module, while pressing

and holding the (TARE) key, press the key.

5.1.4. Customizing The Function Of the Switch F

Assign a function to the key in the general functions.

Functions Related To The Key

Assigns a function to the key from the functions of Fnc02( key ) below :

0: None

1: Manual print command

2: Hold

3: Alternate switch

4: Momentary switch

5: Display selection

6: Clear the tare weight

7: Clear the zero value

CAL15( Clear the zero value ) : The selection to enable or disable clearing the zero value.

CAL20( Output when the gross weight is negative ) : The selection to enable or disable the

print command when the gross weight is negative.

Alternate switch and momentary switch

By assigning these switches to the key, the ON/OFF status of the key can be

transmitted to the master station. This is useful when building a network or performing

maintenance. The function of the display x can be specified by the key and can be

monitored. These switches work as follows :

Alternate switch

When pressing and releasing the switch once, the state of the switch is maintained.

Press the switch again to turn off or on.

Momentary switch

Only while the switch is being pressed, the switch is ON. When it is released, it is OFF.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 55 56

Pas de commentaire

A&D AD-4430B Spécifications Page 16