A&D OP08 Manuel d'instructions télécharger pdf (Page 6)

4. Network Setting

To implement a LAN connection, it is required to set the IP address, subnet mask, etc. for both

the computer and the OP-08. Please consult with the network administrator before assigning IP

addresses, etc.

OP-08 Factory setting

IP address 172.16.100.2

Subnet mask 255.255.0.0

Port number 10001

Attention

-Do not connect the OP-08 to a backbone network.

If any failure in network should occur due to the OP-08, A&D Co., Ltd. will not assume any

responsibility.

-Before connecting to an existing network, consult with the network administrator.

Setting example

Example 1) Connecting two GH balances.

For LAN cabling, straight cables should be used.

IP address Subnet mask

Computer 172.16.100.1

GH-252 172.16.100.2

GH-300 172.16.100.3

255.255.0.0

Example 2) Connecting a computer directly to a single GH balance

For LAN cabling, cross cables should be used.

IP address Subnet mask

Computer 172.16.100.1

GH-252 172.16.100.2

255.255.0.0

Ethernet

hub

Computer

172.16.100.1 172.16.100.2 172.16.100.3

Strai

ht cables

172.16.100.1 172.16.100.2

Computer

Cross cable

1 2 3 4 5 6 7 8 9 10 11 ... 35 36

Pas de commentaire

A&D OP08 Manuel d'instructions Page 6