A&D Weighing Indicator AD-4407 Spécifications télécharger pdf (Page 24)

Page 22 AD-4407 Weighing Indicator

6.6.

Functions

FunctionsFunctions

Functions

There are two parameters lists, one for the F-functions and one for the CF-functions.

These functions control the indicator. The parameters of each function are stored in

the non-volatile memory, and are not lost even if power is turned off or cut off.

F-functions: These parameters can always be changed and are used for internal settings.

CF-functions: If you accept a certificated approval of the weighing instruments, the CAL

cover (rear panel) must be sealed. Therefore, accepting this approval, the

parameters of the CF-function can not be changed.

6.1.

6.1.6.1.

6.1.

Changing the Function Settings

Changing the Function SettingsChanging the Function Settings

Changing the Function Settings

To enter the function settings, do either of the following.

1. When the display is off, press the ON/OFF key while pressing the +/- key.

2. When in the weighing mode, press both the +/- and ON/OFF keys at the same time.

When you are in the function setting, f00 will be displayed .

Operating Item

Step 1 Select an item using the 0 - 9 keys.

ENTER key The key to display a parameter of

the selected item.

Proceed to step 2.

ESC key To exit from functions and enter

the weighing mode.

CAL key The key to exchange F-functions

and CF-functions.

Operating parameter

Step 2 Select a parameter using the

0 - 9 keys.

ENTER key The key to store a parameter

and return step 1.

ESC key The key to return step 1

without changing the

parameter.

CLEAR key Changes the display to the

default value.(Type1)

Changes the sub item.(Type2,

Type3) Type2 and Type3 are

indicated in the parameter table.

Exit function setting

Press ESC key to go to the weight display when an item number is displayed.

6. Functions

Weighing

+/+/

NET

GROS

ENTER

TARE

9 0

+/+/

NET

GROS

ENTER

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 65 66

Commentaires sur ces manuels

Pas de commentaire

A&D Weighing Indicator AD-4407 Spécifications Page 24

Commentaires sur ces manuels

Produits connexes et manuels pour Mesure, test et contrôle A&D Weighing Indicator AD-4407